How to enable BMW ICOM Next WiFi connection?

How to Configure BMW ICOM Next WLAN to enable WiFi connection?

1. Run  ITool Radar to detect ICOM information
configure-bmw-icom-next-wifi-1

2. Open IE browser and enter ICOM configuration address (based on current real ICOM IP )

configure-bmw-icom-next-wifi-2

3. Select WLAN Settings
Enter WiFi settings
Save Changes.

configure-bmw-icom-next-wifi-3

4. Disconnect LAN cable and restart ICOM, then ICOM will auto connect with WiFi .

5. If using our ICOM software and USB-WIFI,  enter configuration as following:
Mode:802.11n,2.4GHz
SSID:ISAP
Security Type: WPA2 Personal
Pre‐shared Key: BmwAp24h

Share This Post

site by bcz