2014 Honda Accord mileage programming with Digimaster 3

How to use Yanhua digimaster 3 mileage programmer to correct odometer for 2014 Honda Accord.

Select “Meter system”, then “Japan & Korea”.
2014-Honda-Accord-digimaster3-1
Select “Honda”.
2014-Honda-Accord-digimaster3-2
Select “Accord”.
2014-Honda-Accord-digimaster3-3
Select “2014 (93C76)”.
2014-Honda-Accord-digimaster3-4
Guide:
Please remove the chip 93C76, and weld it on the OBP adapter, then click on “Next” to read the data.
This is OBP adapter.
2014-Honda-Accord-digimaster3-5

2014-Honda-Accord-digimaster3-6
93C76 is 8 feet IC, please read the following parts on how to weld the chip on the OBP board.
Remove the chip off the dashboard.
2014-Honda-Accord-digimaster3-7
Remove the excess tin on the IC.
2014-Honda-Accord-digimaster3-8
Weld the chip on the OBP adapter packed in the Digimaster3.
2014-Honda-Accord-digimaster3-9
Solder the chip off the adapter.
2014-Honda-Accord-digimaster3-10
Solder the chip back onto the dashboard.
2014-Honda-Accord-digimaster3-11
Use banana oil to clean the chip that was solder back onto the dashboard.
2014-Honda-Accord-digimaster3-12
2014-Honda-Accord-digimaster3-13
digimaster iii tech support: www.obdii365.com

Share This Post

Post Comment

site by bcz