Possible to Write VIN into 2015+ Dodge PCM with Witech?

Purpose: to perform a PCM replaced procedure to learn/synch the skim / write vins on a 2015+ Dodge. Question: I have a good quality micropod II clone registered for online use with Witech 17. Is this possible? If yes, how? My micropod clone has firmware version 2.4 and is registered so works with witech 17.04 software and tech…

Published

Chrysler Scanner Foxwell vs. wiTech Micropod2

Q: since my Chrysler has tackled the MIL, I would like to buy a diagnostic tool. Which hardware is good and cheap?  I am considering the Foxwell and wiTech scan tool. Foxwell NT520/NT530 Review on Chrysler: 1) I have now also bought this brand new diagnostic tool (Foxwell NT530 Pro with free Chrysler software):http://www.obdii365.com/wholesale/foxwell-nt530-full-system-obd2-scanner.htmlYou order…

Published

How to solve wiTECH 2.0 cannot communicate with any module?

Here are some solutions of Micropod wiTECH 2.0 communication failure with all modules. Theory of operation: Below are few different ways communication on a vehicle takes place: Scan tool to the Central Gateway Module (Ex: SGW, TIPM, BCM, etc.) Module to Module Module to Device Device to Module Communication to the vehicle is established with a Micropod 2 scan tool,…

Published

How to install DRB III emulator for Chrysler, Jeep, Dodge

Here are steps to install DRB3 emulator for Chrysler diagnosis and programming. DRB III Emulator definition: DRB III Emulator is the exact scan tool software application used in Chrysler, Jeep, and Dodge dealerships to service non-CAN based vehicles from 1998-2007. Installation Notes: In order to install the Enhanced DRB III Emulator, you must have the…

Published

Top 4 Chrysler Factory Scan Tools

This is a research result about “OBD 2 Chrysler Factory Scan Tools ” from a fellow professional and what he shared with all on the web. Thanks to Brin who has taken the time to do this. Here are several parts included: Part 1: Chrysler and Post OBD 2 and DRB 3 Part 2: Star…

Published

Will wiTech Micropod2 diagnose Chrysler 2018?

This is for those looking for a decent tool works on and flashes all Chrysler vehicles the same level as dealer technician can. Purpose: Want to have full “dealer level” capability for all Chrysler – Hemi / Cummins / body modules, Ecodiesel, Pentastar 3.6, everything Chrysler / Ram like we do on GM and Ford Tools…

Published

Witech Micropod2 Program Jeep Wrangler 2018 FOBIKs

Micropod 2 with wiTech software is able to program a new key to Jeep Wrangler 2018. Car: 2018 JEEP WRANGLER 3.5L V6 24V WT ENGINE UPG I W/ESS Here you go…. In wiTech software interface, Select RFH – Misc Functions – Program Ignition FOBIKs Miropod2 starts to program ignition fobik(s) Just do as what displayed in the interface Turn…

Published

How to make Mircropod 2 work with DRBIII Emulator?

Confirmed! Clone wiTech Micropod 2 Chrysler diagnostic interface is working good with DRBIII Emulation!   Look at the post here:   Thanks to Radius for the info he provided in the first post along with information provided by ShufStiX in various other threads. I PM’d for the link PW after giving +rep and thanks but…

Published

Micropod II Clone Works Good on Chrysler WK DS 2015

Reasons for the purchase: All of the dealers in my area don’t seem to know what they are doing. No problem with either of my vehicles is solved on the first visit and I normally have to guide the dealer mechanics to find issues. They are very nice but I honestly don’t have the time to…

Published

How to get witech micropod 2 to work with DRB III Emulator

Here’s the customer solution to make Clone wiTech Micropod 2 Chrysler diagnostic tool work with DRB Emulation.     Intention: Trying to find one micropod II that would work properly with DRB Emulation. Especially with Chrysler Crossfire.   Credit to Radius from Mhhauto. You are at your risk.   Test procedure: Test 3 different micropod interfaces. 2 devices did…

Published