Autel IM608 Calculate W211 Password via MB Testing Tool

 The new Professional MB EIS ESL testing tool can be used to replace the Autel G-box2 to fast calculate Mercedes Benz password with MaxiIM IM608/IM508 on bench. Obdii365.com provides tutorial here on W209 W211 password retrieval with IM608 and MB test platform.

autel-im608-mb-test-tool-w211-password-1

Follow wiring diagram here to connect devices

autel-im608-mb-test-tool-w211-password-2

autel-im608-mb-test-tool-w211-password-3

Connect mb testing tool with im608’s j2534 passthru vci via old cable

autel-im608-mb-test-tool-w211-password-4

autel-im608-mb-test-tool-w211-password-5

autel-im608-mb-test-tool-w211-password-6

Connect mb testing tool with w211 EIS via w169 w171 w209 w211 w245 eis ezs cable

Turn on power and Test EIS ESL button and on the mb testing tool

The green indicator on the j2534 vci will turn on

In im608 select IMMO function ->Mercedes-benz-> Expert Selection -Get password->All keys lost (fast)

autel-im608-mb-test-tool-w211-password-7

autel-im608-mb-test-tool-w211-password-8
autel-im608-mb-test-tool-w211-password-9

autel Im608 indicates akl function used together with g-box

Here the mb testing tool can replace g-box

autel-im608-mb-test-tool-w211-password-10

Select on bench (g-box fast) and continue

autel-im608-mb-test-tool-w211-password-11

Turn on g-box mode 2 and on bench buttons on the mb testing tool

autel-im608-mb-test-tool-w211-password-12

Select w211

autel-im608-mb-test-tool-w211-password-13

Im608 gives instruction to read password via box and apb112 emulator, press BEGIN to continue

autel-im608-mb-test-tool-w211-password-14

Step 1: check device, obd cable and obd connector connection

Connecting to obtain data

autel-im608-mb-test-tool-w211-password-15

Step 2: Insert the IR key simulator to the programmer (here we insert IR emulator into EIS)

autel-im608-mb-test-tool-w211-password-16

Step 3: Insert IR emulator into EIS. If already inserted, remove and insert it again

autel-im608-mb-test-tool-w211-password-17

Step 4: Getting password in progress

Turn off g-box2 mode on mb testing tool

autel-im608-mb-test-tool-w211-password-18

Insert new key into EIS, turn on ignition and then off

Remove and insert key tun on ignition again

autel-im608-mb-test-tool-w211-password-19

Successfully calculate password

The MB testing platform can be used to test ESL status, test gearbox, gateway and ECU on bench as well.

autel-im608-mb-test-tool-w211-password-20

autel-im608-mb-test-tool-w211-password-21

The MB testing tool is compatible with multi MB programmers including Autel, AVDI, VVDI MB,  Key Tool Plus padCGDI MB etc

cgdi-mb-mb-test-tool-1vvdi-mb-mb-test-tool-1key-tool-plus-mb-test-tool-1

Share This Post

site by bcz