Kess V2 Ktag V2.70 Software Update Feature

New Ksuite 2.70 has been tested working with kess v2 v5.017 and Ktag 7.020 EU or China clone online version.  Ksuite 2.70 fixed bugs from version 2.53, fixed speed, fixed various issues like wake up errors, old problems from previous versions.

 

 

For Kess v2 

 

software ksuite 2.70 update feature: 

1.Remove Bugs

2.Reduce 80% Wake Up Error

3.Fix Checksum Error

4.Fix RSA Error

5.Fix Unmatched Key Error

6. Pcr2.1 Unlock Corrected

7.OBD2 edc15v edc15p edc15vm No Problem

8.Writing without problems At edc17 VAG

9.Optimize Running Speed

Note: works with Kess v2 5.017

 

 

Free download Kess v2 Ksuite 2.70 on mega

ktag-v7020

User test report of the new kess 2.70:

1). tested with china kess 5.017. EDC15P+ VAG worked fine Read / Write

2).  Tested on EDC17c46 VW Caddy and write no problem. Also test edc16c39 read and write no problem. Kess 5.017

3). done read / write on VW Golf mk5 bkd with edc16u1 and no problem

4). Smart edc16c34 no problem

5) . tested with china kes v2 v5.017. EDC16U1 GOLF BKD. worked fine Read / Write

6). just tried it on an EDC16CP34. worked normally.  Works perfect.

7). The program works. Tested on Insignia 2.0 cdti, Astra 1.6, Transit 2.2.

8). Works with Kess from 5.17, read in Opel year 2000  Z16XE.

9). This 2.70 has changed VAG EDC17CP14 to no read on OBD

10). Passat EDC17_C46  Write today without problem.

11). GOLF EDC16U34 read write ok

 

 

 

For Ktag 

Update old ktag to 2.70 successfully without any issues and you will have all new protocol from Ksuite 2.70.

You need to use your Ksuite 2.25 version to work

Connect you Ktag and open Ksuite 2.70 and wait.. it takes about 2 minutes to update all protocol.. after that you can use your ktag with Ksuite 2.25 .. Have fun

 

You can Download both version here.

FREE NO PASS !!!

 

Free download Ksuite 2.70 for ktag

Free download Ksuite 2.25 for ktag

ktag-ksuite-v270-1

 

Note: works with Ktag 7.020 firmware. After the upgrade, Ktag must be started in Ksuite 2.25 !!!

 

 

 

User test report of the new ktag 2.70:

1). Yes china ktag clone works.. i just update another china clone without any issue.. after update starts just wait till done. after you will have error .. no internet connection.. then open 2.25 and have all new protocol inside.

2). just tested and seems to work !

You can use with internet. No problem  at all.. same as before..
3). it is working without problems. unpack both to c partition
start ksuite 2.70 with ktag plugged in
wait for update to end
open ktag 2.25 and then use it with ktag
4). Works (Kess 2.70 and K-Tag 2.25). Good job.

ktag-ksuite-v225

ktag-ksuite-v270-2

ktag-ksuite-v270-3

 http://blog.obdii365.com/2021/01/14/free-download-ksuite-2-70-for-eu-or-china-kess-v2/

Share This Post

site by bcz