Lonsdor K518 Program Nissan X-trail 2017 ID47 Smart Key

The tutorial is to program a new smart key on the car 2017-2019 Nissan X-trail.  Key programming and pin code calculation is performed by the Lonsdor K518ISE key programmer.

Key information:
ID47 Hitag 3 (AES) chip
3-button smart keys
lonsdor-k518-nissan-xtrail-smart-key-1
Procedure:
Connect K518 with vehicle
Turn on ignition switch
Select Immobilizer->Nissan->Select from vehicle->X-tail->T32-> Proximity smart->Program smart key
lonsdor-k518-nissan-xtrail-smart-key-2

lonsdor-k518-nissan-xtrail-smart-key-3

lonsdor-k518-nissan-xtrail-smart-key-4

lonsdor-k518-nissan-xtrail-smart-key-5

lonsdor-k518-nissan-xtrail-smart-key-6
Turn on emergency light/turn ignition off
All keys will be deleted
Security checking
lonsdor-k518-nissan-xtrail-smart-key-7
Press and release car start button, put the log end of the 1st smart key close to the button until the dash turns on and the security indicator flashes 5 times.
lonsdor-k518-nissan-xtrail-smart-key-8
Press Start button once and turn off ignition
lonsdor-k518-nissan-xtrail-smart-key-9
Program 1st key completed.
lonsdor-k518-nissan-xtrail-smart-key-10
Follow steps above to program next key until complete
Press car Start button,put the log end of the 1st smart key close to the button until the dash makes sound
lonsdor-k518-nissan-xtrail-smart-key-11
lonsdor-k518-nissan-xtrail-smart-key-12
Press Start button once and turn off ignition
lonsdor-k518-nissan-xtrail-smart-key-13
Press Start/Stop button once to check if engine can be started
Then test remote control.
lonsdor-k518-nissan-xtrail-smart-key-164
Lonsdor k518 successfully added a new smart key to X-trail 2017.

Share This Post

site by bcz