Lonsdor K518ISE Program Remote Key on Honda CRV 2015

How to make a chip key with auto start on the Honda CR-V 2015. In the key chip ID49 Hitag 3 (Hitag pro). The remote control buttons are automatically programmed. Key rogramming is done with the Lonsdor K518ise key programmer.

lonsdor-k518ise-2015-honda-crv-1
Remote key 3 buttons
Note: DO Follow each IGN ON/OFF operation.
Connect K518 host with vehicle via OBD Socket
Select Immobilizer->Honda->Select from vehicle->CR-V->2012 up-> Immobilizer->Search Immo Type->Immo Type
lonsdor-k518ise-2015-honda-crv-2

lonsdor-k518ise-2015-honda-crv-3

lonsdor-k518ise-2015-honda-crv-4

lonsdor-k518ise-2015-honda-crv-5

lonsdor-k518ise-2015-honda-crv-6
Turn on ignition switch
lonsdor-k518ise-2015-honda-crv-7
Lonsdor K518 identified the immo type 2
Then go back to select IMMO2 and Add Key
lonsdor-k518ise-2015-honda-crv-8
Insert registered key and switch ignition ON
lonsdor-k518ise-2015-honda-crv-9
Turn off ignition in 15s
lonsdor-k518ise-2015-honda-crv-10
Turn ignition on with original key in 17s
Turn off ignition in 17s
lonsdor-k518ise-2015-honda-crv-11
Turn on ignition with a new key in 20s
Turn off ignition in 17s
lonsdor-k518ise-2015-honda-crv-12
Turn on ignition switch without replacing key in 20s
Turn off ignition in 15s
Turn on ignition
Check if the immobilizer indicator goes off
lonsdor-k518ise-2015-honda-crv-13

lonsdor-k518ise-2015-honda-crv-14
If yes, turn off ignition in 15s
Switch ignition on
lonsdor-k518ise-2015-honda-crv-15
The new key has been successfully programmed
lonsdor-k518ise-2015-honda-crv-16
Test all keys.
Done.

Share This Post

site by bcz