Today flashing the engine control unit on the Fiat Ducato III 2013Y 2.3L MT EDC16C39.
It was necessary to turn off the EGR valve (it will shut up, a lot of soot in the intake manifold), DPF diesel particulate filter (to be cut), and of course, a fine tuning by itself)
We will need the KESS V2 Master programmer clone or origianl.
(Disclaimer: The tutorial was translated from Russian. You are at your risk. Click to enlarge all images)
Go.
Launch KSuite :
Choose a Fiat Ducato with the specified EDC16c39 control unit :
ECU identification:
HW: 0281018924
SW: 103752158
Spare: 55244353
Now we will read the calibrations, press reading:
Almost half read:
Almost everything was considered:
Turn off the ignition:
Calibrations were counted as 15min, the correct size was 2Mb:
Now, in the Ksuite program, select and write the new file: