Solved!Lonsdor KH100+ Cannot Detect Key Info

 Offer working solution to Lonsdor KH100+ error ” can’t detect a key”. Thanks to obdii365.com engineer.

 

First, let’s describe what the problem is.

lonsdor-kh100-failed-to-detect-a-key-1

Image 1: Turn on Lonsdor KH100+, agree the disclaim, enter “Identify Copy”, as shown in the pic, put a chip, click OK. And it always shows “Please wait, identifying” and no key result.

lonsdor-kh100-failed-to-detect-a-key-2

Image 2. Back to the home, enter “Remote control function”, then “Remote Frequency”, put remote control to detect, and the frequency is :0.000 Mhz.

 

So, what is the solution?

Please download KH100 Update Tool.exe here:

https://mega.nz/file/8VxhiKJL#JH4mL8a6PSFEeZGDi_kUzzfNivP6JFS2ajxqGmjj3P4

It contains “Steps video.mp4” guiding you how to use this .exe file.

 

Steps:

Step 1. Install .Net Framework 4.6.1.

Step 2. Unzip the above file.

Step 4. Use the USB cable to connect Lonsdor KH100+ to the computer, long press the “Down” button for few seconds and then press the power button once.

Step 3. Hold the “Down” button for a few seconds and press the power button once, you will enter USB data mode.

Step 5. Open the above repair file, click on “KH100UpdateTool.exe.”, then “Update”, soon you can see “Update completed”.

Step 6. Back to KH100+ and press “OK” button, and the device will update automatically,  you just check whether it will work normally.

lonsdor-kh100-failed-to-detect-a-key-3

lonsdor-kh100-failed-to-detect-a-key-4

Alright, any question on Lonsdor KH100+, contact at www.obdii365.com

Share This Post

site by bcz