Yanhua ACDP Clone BMW X5 N55 DME no soldering

Question:

2012 BMW X5 DME, possible to clone it with Yanhua mini acdp, by transfer the whole file to another DME?
yanhua-acdp-clone-n55-dme-1

yanhua-acdp-clone-n55-dme-2
Solution:
The DME is N55 (MEVD172) type. Yanhua ACDP will clone the DME.
Device required:
Procedure:
yanhua-acdp-clone-n55-dme-3
Step 1: Prepare ACDP, OBP+ICP adapter, interface board and DME
yanhua-acdp-clone-n55-dme-4
Step 2: Connect the interface board correctly to the DME interface as shown above
yanhua-acdp-clone-n55-dme-5
Step 3: Shorten the CAN resistor on the OBP + ICP adapter to the “CAN-R Join”
yanhua-acdp-clone-n55-dme-6
Step 4: Connect the ACDP, OBP+ ICP adapter, interface board and DME
Step 5: Run ACDP App
Select BMW->ECU Clone->Fxx->N55(MEVD172)
yanhua-acdp-clone-n55-dme-7

yanhua-acdp-clone-n55-dme-8

yanhua-acdp-clone-n55-dme-9

yanhua-acdp-clone-n55-dme-10
Follow ACDP Mini guide to Read/write EEPROM, then Read/Write PFLASH.
yanhua-acdp-clone-n55-dme-11