The SVCI ING Nissan J2534 diagnostic tool can be used to program both new (blank) and used ECM, TCM etc control units after replacement. Here’s the guide demonstrating a black TCM programming in less than 4 minutes.
SVCI ING program Nissan TCM very fast
Nissan TCM (Automatic Transmission Control Module) example:
310F6-1VA5A BEA01-120NA1 3603
Download, install, register Baochi Cloud diagnostic software and bind device to laptop
Nissan TCM Programming Procedure:
Connect TCM module with SVCI ING J2534 interface and 12v power adapter
Check the svci communication indicators’ status, the left indicator turns on and the right indicator flashes
Insert the SVCI ING Bluetooth dongle to laptop
Add a Bluetooth device
Search the SVCIBT-NS******** (with your serial number) device and pair
Open Baochi Cloud Diagnostic software on desktop and login
(click to enlarge following images if cannot see clearly)
Select Special Functions-> Re/Programming->Nissan/Infiniti/Datsun/GTR-> Replacement/Blank->TCM
Select operation mode: Default mode is recommended
select proper file, press OK to continue
Turn off ignition and replace TCM, then turn ignition to ON position
Prepare for programming. Make sure keep battery voltage above 12V
Transferring data to SVCI ING Nissan
Programming in process. Don’t interrupt SVCI connection.
Wait until programming completed. Turn ignition OFF/ON several times.
Click OK and clear stored DTCs.
The TCM programming process takes 3 minutes and 49 seconds which is very fast.