Yanhua Mini ACDP released B48 & B58 ISN code reading & writing from DME on bench without opening DME shell. No need to drill the hole. Support all F/G chassis versions and all B48/B58 DME which chip model is (SPC5777/TC298TP).
No programming is required and the ISN is read in seconds.
Yanhua ACDP Read ISN B48 B58 on Bench
Requirement:
Yanhua Mini ACDP host
ACDP BMW Key Programming license (if need to program new keys)
DME unit
Read B48 ISN from DME with Yanhua ACDP:
Connect B48/B58 Bench board interface to the DME unit
Shorten the CAN register on the OBP+ ICP adapter or the jumper cap to the “CAN-R-Join” port according to the marked position
Connect ACDP with OBP+ ICP adapter, interface board and DME as picture above
Run MINI ACDP App
Select BMW module->DME ISN->BENCH Mode Read/Write DME ISN
Run MINI ACDP App
Select BMW module->DME ISN->BENCH Mode Read/Write DME ISN
Select Chassis
in Fxx, newly added B48 (MG1CS003), B48 (MG1CS201) and B58 (MG1CS003) DME types
In Gxx, newly added B47 (MD1CP002), B48 (MG1CS003), B57 (MD1CP002), B58 (MG1CS003) and N74 (MG1CS003) DME types
Here we take Fxx DME B48 (MG1CS201) for an example
Tip: You can press the Help menu to check wiring connection & instruction
Read ISN
Make sure ACDP Mini interface board and DME are well connected
Reading eeprom
Save eeprom
Uploading files
Auto saved file to default folder
Decrypting chip data
Confirm ISN and VIN
Read B48 ISN code success
Save data.
Test & Feedback:
Using ACDP to Read ISN of B48 dme of 2018 BMW 3 series F35 in few minutes!
