Autel IM608 Program Keys for 2010 Chrysler Town & Country

Autel MaxiIM IM608 did successfully pull the pin on a 2006 Dodge and I’m gonna show another 2010 Chrysler Town and Country.

Auto detect.

autel-im608-chrysler-town-and-country-1

Auto scan VIN.
Chrysler (USA).

autel-im608-chrysler-town-and-country-2

Diagnostic program loading.
Smart Mode.

autel-im608-chrysler-town-and-country-3

Read the message.

autel-im608-chrysler-town-and-country-4

Establishing vehicle communication.

Select “Smart Key”.

autel-im608-chrysler-town-and-country-5

Switch the ignition OFF and then ON again, make sure the engine is off.

autel-im608-chrysler-town-and-country-6

Establishing vehicle communication.

The password is 3679.

autel-im608-chrysler-town-and-country-7

Select “Read Immobilizer Password (CAN)”.

autel-im608-chrysler-town-and-country-8

Go to “Key Learning” again.
Tap “OK”
Establishing vehicle communication.

autel-im608-chrysler-town-and-country-9

autel-im608-chrysler-town-and-country-10

Learning failed.
I guess I should have the new key there.

autel-im608-chrysler-town-and-country-11

Turn the ignition off and pull out the current key. Insert another key to be programmed, turn the ignition on, and make sure the engine has not been started.

autel-im608-chrysler-town-and-country-12

Establishing vehicle communication.

Current number of keys is: 3
Learning successful.

autel-im608-chrysler-town-and-country-13

I don’t want to learn the next key, let’s see if it works.

autel-im608-chrysler-town-and-country-14

This is the new key, and I press the “Unlock button” it can start the car, nice.

autel-im608-chrysler-town-and-country-15

This is the old key.

autel-im608-chrysler-town-and-country-16

So. Success. As you can see, you did not need to connect the programmer, you can directly connect Autel IM608 to the Chrysler via OBD.

Share This Post

site by bcz