Autohex II can read write change BMW ISN?

Here is all about BMW ISN (DME DDE EWS CAS). ISN is not a software, but rather it is the immobilizer key code that the EWS or CAS module (the immobilizer security module). Newer cars’ ISNs use a starting code that is stored in the DME (or DDE if a diesel car) and then change the code (rolling…

Published

iProg Pro V82 Software Download and Installation

iprog+ Pro clone new software version V80 released more odometer correction models.  Check the free download link and installation guide below. Software Version V82Language: English RussianOperating system: WinXP, Win7, Win8 iProg+ Pro V82 free download link: https://share.weiyun.com/5eWcQny Password: yrhy36 Main steps to install V82 iProg Pro: Step 1: Create a new folder in any convenient place on…

Published

How to use Benz OBD2 FBS4 Odometer Correction Tool?

Question: i have DP4 original and i need correction odometer for a Mercedes W205 C class yr 2016. When try change km instrument give me CAN_time out ff error? The model is not supported?? What other tool can do this model and how? Solution: Actually mercedes W205 2016 is not supported with DP4 If using a CAN…

Published

Xentry Passthru Works Best with Mongoose Cable

This is the first time I played with Xentry. Xentry xdos: xentry diagnosis for 12/24v using partd aka C3 (obsolete), sdconnect aka C4, ecom, xentry connect aka xentry kit 2, and bosch vci aka xentry kit 3 Xentry passthru EU or USA: xentry diagnosis using J2534 passthru devices e.g: mercedes passthru vci (12/24v), avdi, vas5054a (12v), drewtech MongoosePro…

Published

Chrysler SGM Solution using Autel FCA 12+8 Cable

2018 and newer Chrysler, Dodge, Ram, Jeep, and Fiat now have a secure gateway module or SGM.  This SGM will not allow your scan tool to do bidirectional controls on the vehicle. Autel has provided a cable to bypass the SGM. Image: source: http://www.obdii365.com/wholesale/fca-128-universal-adapter-cable-adapter-for-autel.html Function:1.OBD instrument mileage calibration, OBD anti-theft matching, etc.2.Used with other diagnostic devices…

Published

How to Register Nissan Consult III S/N Step by Step?

Here’s the working solution to Nissan Consult III diagnostic tool “No VI/MI detected” problem. 1.The software should be loaded on Win XP 32bit/64bit laptop 2.Well installed the device driver 3. Install license patch 4. VI serial number should be registered. Free Download Consult-III software  Password: teoc9x Nissan Consult 3 VI regeneration: *Does not require vehicle connection during…

Published

iProg+ Pro V80 vs. Carprog Full V10.31

Look here: difference between iProg Plus and CarProg Programmer iProg Plus CarProg Full Image     Price (china clone) 109.00 usd 69.99 usd Update Free to update; Users can update iprog+ sw themselves FREE but new firmware required; Users cannot update carprog sw on their own Software version V80 (released in 2019) V10.93 (released in…

Published

Kess V2, Ktag clone – safe to read write ECUs via OBD?

The problem with some ECU’s, is that you can’t read them over OBD (except on some original/high priced tools) and for that reason you may need KTAG to read a full BDM, unlock TPROT (if it’s available), write the modifications back with KTAG and then you can use KESS over OBD to read/write. Here’s how it works in 4…

Published