Xtool X100 PAD2 Read VW Polo 2010 Dash 24C64

Model: VW Polo 2010
Module: Dashboard
EEPROM chip:24c64
Device used: Xtool X100 Pad2
Purpose: need eeprom file from dashboard to get CS and PIN for all keys lost

xtool-x100-pad2-vw-polo-24c64-1

xtool-x100-pad2-vw-polo-24c64-2

Procedure:
In Xtool Pad2, select EEPROM adapter->EEPROM Program

xtool-x100-pad2-vw-polo-24c64-3

xtool-x100-pad2-vw-polo-24c64-4

Make sure the eeprom adapter is connected and powered on, the status light is turned on

xtool-x100-pad2-vw-polo-24c64-5

xtool-x100-pad2-vw-polo-24c64-6
xtool-x100-pad2-vw-polo-24c64-7

Select 24CXX Series->24C64

xtool-x100-pad2-vw-polo-24c64-8

xtool-x100-pad2-vw-polo-24c64-9

Reading eeprom in process

xtool-x100-pad2-vw-polo-24c64-10

Read data completed.

xtool-x100-pad2-vw-polo-24c64-11

auto save data in default folder

xtool-x100-pad2-vw-polo-24c64-12

Check data.

OBD helper can pull CS and PIN tool.But not compatible with x100 pad2.
VAG OBD Helper is good for VVDI2 and no need to remove dashboard.
It makes life so much better. 5 minutes max if you got the key cut already.
just tokens. You can buy as many as you want and it’s loaded instantly on the network.

http://www.key-programmer.org/2019/12/17/read-vw-polo-2010-dash-24c64-eeprom-by-xtool-x100-pad2/

Share This Post

site by bcz