iProg Pro Original vs. Red Clone vs. Black Clone

Look here: iProg Pro programmer original or clone? black or red?

iProg pro original:
iprog-original
price: 580 usd around
fyi, there are two versions of cloned iprog programmers:
one with a red look, the other with a black shell
price: 350 usd around (200-300 usd cheaper)
iProg pro clone in red:
iprog-pro-clone-red-1

iprog-pro-clone-red-2
iProg pro clone in black:
iprog-pro-clone-black-1

iprog-pro-clone-black-2
     
What’s the difference?
the original iProg programmer comes with full adapters but it’s expensive:
  1. EEPROM adapter
2.BDM adapter
3.CAN adapter
4.K-Line adapter
5.RFID 125kHz adapter
6.RFID 134kHz adapter
  1. Pin-out adapter
  2. PROGRAMMER IPROG +
  3. OBD cable
the clone iProg programmers are cheaper, but only the second (black shell) is confirmed to work well:
  • Work with odometers on OBDII connector
  • Work with odometers on the table through adapters
  • Work with multimedia unlocking the tape recorder
  • Work with keys (IMMO, Transponders), copying, preparation, unlocking
  • Work with IMMO-Key Auto dumps
  • Work with the airbag computer, deleting crash data
  • Transfer readings from miles to km
  • Read and write processors and its used in cars
  • Remove the particulate filter in the dump
  • Work with keys to the intercom
  • Read Pin cod from dump (some brands)
Which iProg programmer should you take?
A genuine iProg pro programmer must be your best way to go.
But if your budget is limited or you just look for a decent iprog at a good price(no matter it’s original or not), you can get the one in black. it’s verified to work and will help you save a lot
Confirmed to work no issues on Windows 7 32 bit
Tested by real professionals Work for obdii365.com

Share This Post

site by bcz