CGDI Prog MB key programmer guide: copy Mercedes W216 key without key.
The vehicle should be feed with enough power, connect OBD ,read the EIS data.
Go to“compute password”，choose“copy key without key”
Click“collect data”
Connect simulation key, insert into EIS
Physical operation diagram
Please pull out the simulation key within 1 minute
Please insert the simulation key within 1 minute
Repeat the insert and remove key operation for 400 times, the procedure takes 60 minutes around. Please wait patiently.
Collection success, save data, default file name
Save the file successfully, click OK
Click“Upload Data”
Open the data just saved
Upload data successfully
Click“Query Result”
Query key password successfully
Copy key password
Go to EIS, copy password
Save EIS data，default file name
Go to “Generate EE”, Load EIS file, check the information
Click“Generate key file”, please wait patiently
The key file was generated successfully, save the file with a new folder
Go to “Read/ write key”
Insert the new key into the CGDI MB
Click’ Read key’, to show the key information
Wipe out the key
Click“open/write”, please note the prompt
Choose unused key data
Write key success
Learning on car
Read the EIS data again, show the key data was used, combine the new key can get on
car ,match successfully！
car ,match successfully！