Yanhua Mini ACDP Program Porsche BCM Key No Soldering

Yanhua Mini ACDP released new Porsche module– supporting newer Porsche year 2010 BCM key programming (add key & all keys lost.) No soldering. No removing components.  With data backup and key refresh function, no risk of damaging BCM module.

Here’s the guide on adding a new key to Porsche BCM 1N35H.
Step 1: Make Connection 
You should have ACDP Android/iOS mobile App downloaded and Porsche authorization opened before operation.
Connect ACDP device, OBP+ICP adapter, BCM interface board and BCM module.
yanhua-mini-acdp-porsche-1n35h-1
Check the crystal oscillator package of BCM module:
EXT1 short-circuited for ceramic packed crystal oscillator ; EXT2 short-circuited for metal packed crystal oscillator.
yanhua-mini-acdp-porsche-1n35h-2

yanhua-mini-acdp-porsche-1n35h-3

yanhua-mini-acdp-porsche-1n35h-4
Step 2: Read PFLASH data
Open ACDP App
Select Porsche function->Add key for new Porsche->ICP IMMO->MC9S12XEP100 (Mask 1N35H)->Add key (auto mode)
yanhua-mini-acdp-porsche-1n35h-5

yanhua-mini-acdp-porsche-1n35h-6

yanhua-mini-acdp-porsche-1n35h-7

yanhua-mini-acdp-porsche-1n35h-8

yanhua-mini-acdp-porsche-1n35h-9
Note: ACDP will program keys for Porsche BCM 1L15Y, 5M48H, 1N35H and 2M25J.
yanhua-mini-acdp-porsche-1n35h-10

yanhua-mini-acdp-porsche-1n35h-11
Check PIN detection status to make sure well connection is built
yanhua-mini-acdp-porsche-1n35h-12
Press Yes if the BCM module chip has been encrypted
yanhua-mini-acdp-porsche-1n35h-13
Encrypting chip data
Reading PFLASH data
yanhua-mini-acdp-porsche-1n35h-14
Save PFlash data
yanhua-mini-acdp-porsche-1n35h-15
Pflash data was auto saved to D:/Program Files (x86)/Nanning Yanhua/PC-ACDP/WebResource/aliyun/devfile/fromdev/ATmatch/porsche/xxx folder
Step 3: Read EEPROM/DFLASH data
Reading EEPROM/DFLASH data
yanhua-mini-acdp-porsche-1n35h-16
Save original EEPROM dump data
yanhua-mini-acdp-porsche-1n35h-17

Save DFLASH data
yanhua-mini-acdp-porsche-1n35h-18
Step 4: Add a New Key
Yanhua ACDP will display IMMO information, VIN, software number and keys info.
yanhua-mini-acdp-porsche-1n35h-19
Confirm and press Continue
Keep the ACDP device power on. Disconnect the OBP+ ICP adapter and ACDP device firstly.
(Keep the OBP+ ICP adapter, BCM interface board and BCM module connected)
Connect the ACDP device to the BAV-key adapter and put the key into it
yanhua-mini-acdp-porsche-1n35h-20
Reading original key information
yanhua-mini-acdp-porsche-1n35h-21
Current key ID
yanhua-mini-acdp-porsche-1n35h-22
Select a valid key position to add key
yanhua-mini-acdp-porsche-1n35h-23
Reading key information and programming key
yanhua-mini-acdp-porsche-1n35h-24
yanhua-mini-acdp-porsche-1n35h-25
Auto backup the DFLASH data after adding a new key
Connect ACDP device, OBP+ ICP adapter, BCM interface board and BCM module. Check PIN connections again.
Check the IMMO information
yanhua-mini-acdp-porsche-1n35h-26
Now you can see the Key06 position has a new key stored
Press continue.
Decpryting the chip
yanhua-mini-acdp-porsche-1n35h-27
Writing EEPROM/DFLASH data
Verifying chip data
yanhua-mini-acdp-porsche-1n35h-28
Add key completed.
yanhua-mini-acdp-porsche-1n35h-29
Yanhua ACDP will auto generate and save logs.
Install the BCM module back to vehicle.
Test the new key.

Share This Post

Post Comment

site by bcz