Fiat Ducato 2006 Key Learning using FVDI

How to: read pin code & program transponder key to Fiat Ducato/Jumper/Boxer 2006 key using FVDI Abrites Commander by OBD.

Step 1: Read BCM by OBD & Save dump data
Open FVDI Fiat software
fvdi-fiat-ducato-2006-1

Go to Special Functions->Read/Update ConfData
Select Unit type: BCM Mareli (NEC 70F3237)
fvdi-fiat-ducato-2006-2

Press Read ConfData
Read dump data success
fvdi-fiat-ducato-2006-3
fvdi-fiat-ducato-2006-4

Save data
Step 2: Read Pin Code
fvdi-fiat-ducato-2006-5

Choose Transponder Maker function
fvdi-fiat-ducato-2006-6

Select Fiat model Ducato 2006, immobilizer BCM Mareli (93C160/95C320)
Transponder Megamos 48, max number of keys: 8
Press Load Dump
fvdi-fiat-ducato-2006-7

Load dump saved in step 1, precode transponder and see PIN
fvdi-fiat-ducato-2006-8

FVDI Fiat read 5-digit PIN.
Step 3: Key Learning
Learn precoded transponder by OBD and start the car
Select Key Learning function
fvdi-fiat-ducato-2006-9
fvdi-fiat-ducato-2006-10

Select Fiat Ducato
Press Connect button
FVDI read immo status
Enter Pin code and press Program key
All already programmed keys have to be reprogrammed.
Keys which are not programmed during this programming procedure will be cancelled forever(unusable)
Except if the keys have never been programmed on the vehicle.
fvdi-fiat-ducato-2006-11
Specify the number of keys to be learned: 1
Press OK
fvdi-fiat-ducato-2006-12
Insert a key into ignition switch and turn on ignition
fvdi-fiat-ducato-2006-13

Key number 1 is programmed
fvdi-fiat-ducato-2006-14

Programming completed successully
Now you can start car with the key.

Share This Post

Post Comment

site by bcz