How to Connect JLR DoIP VCI Genuine via USB

Original JLR DoIP VCI Jaguar Land Rover diagnostic tool supports both USB and WiFi connection. Here’s the guide to connect JLR VCI via USB.

To setup USB connection, you need to download Bosch driver for VCI first:
Open Bosch_Driver folder
jlr-doip-vci-usb-connection-1

Open MTS6533_Setup
jlr-doip-vci-usb-connection-2

Install Bosch VCI Software (JLR)
Press Next
Press Next
Press Install
Finish installing Bosch VCI software
jlr-doip-vci-usb-connection-3

USB Configuration in progress. Don’t disconnect JLR VCI from PC until a message indicates that the configuration process has completed.
jlr-doip-vci-usb-connection-4
Open Device Manager to check the Bosch JLR DoIP VCI adapter is well connected
jlr-doip-vci-usb-connection-5
Open VCI Manager on desktop to make sure the Manager detect JLR VCI which indicates interface is well connected
jlr-doip-vci-usb-connection-6
Right click JLR SDD software on desktop->Find File location C:/Program Files/JLR/SDD/Runtime
jlr-doip-vci-usb-connection-7

Open the GatewayManager with Notepad
Find “Device5 = JLR-DOIP” and change value to “ Device5 = JLR-DOIP”
jlr-doip-vci-usb-connection-8

jlr-doip-vci-usb-connection-9
Find Go to C:/Program Files/JLR/IDS/Runtime
jlr-doip-vci-usb-connection-10

Open the GatewayManager with Notepad
Find “Device5 = JLR-DOIP” and change value to “ Device5 = JLR-DOIP”
jlr-doip-vci-usb-connection-11
Setup completed.
Now you can run JLR SDD and Pathfinder software
jlr-doip-vci-usb-connection-12

jlr-doip-vci-usb-connection-13

jlr-doip-vci-usb-connection-14
jlr-doip-vci-usb-connection-15

jlr-doip-vci-usb-connection-16

jlr-doip-vci-usb-connection-17
http://blog.obdii365.com/2018/09/21/free-download-bosch-driver-for-jlr-doip-vci-usb-connection/

Share This Post

Post Comment

site by bcz