How to use Auro IM600 to Make Key Ford Escape 2009

How to Program Ford Escape 2009 all keys lost with Auro OtoSys IM100/IM600 tablet.

auro-im600-ford-escape-1
Make a good connection
Select IMMO->Ford->Manual Selection->USA->Escape->2008-2012->Blade key->Immobilizer (CAN)->Erase key
auro-im600-ford-escape-2

auro-im600-ford-escape-3

auro-im600-ford-escape-4

auro-im600-ford-escape-5

auro-im600-ford-escape-6

auro-im600-ford-escape-7
All keys will be eresed. At least 2 keys are required for key learning to complete
auro-im600-ford-escape-8
Turn on ignition switch
auro-im600-ford-escape-9
Learned key: 3
Press Yes
auro-im600-ford-escape-10
All keys have been erased. 
Erasing successful.
auro-im600-ford-escape-11
All known key has been erased. You must now program a minimum of two keys.
auro-im600-ford-escape-12
The engine will not start until you complete the following steps:
Perform the following steps to learn the ignition keys.

1. Turn off ignition 

2.Turn the first key in the ignition to ON for 3 sec, then remove
3. Turn the next key in the ignition to ON for 3 sec, then remove
auro-im600-ford-escape-13
4. Add more keys 
auro-im600-ford-escape-14
5. After you finish all necessary functions, confirm that all learned keys can start the engine.Verify that the engine continues to run for at least 5 sec
auro-im600-ford-escape-15
Key learning completed. 

If you are interested in AURO OtoSys IM600 , please contact us for price.Thank you :)

Whatsapp : +86 18259252285
Skype: obdii365.com
E-Mail:sales@obdii365.com


Share This Post

Post Comment

site by bcz