How to use Lexia3 to do Citroen C3 diagnostics

China cloned Lexia 3 Diagbox tested with Citroen C3:
Citroen C3 Diagnosis – Global Test
lexia3-citroen-c3-1
Switch off the ignition and switch it on again
lexia3-citroen-c3-3
Switch for the vehicle configuration
lexia3-citroen-c3-14
Lexia3 is testing systems from Citroen C3
lexia3-citroen-c3-5
lexia3-citroen-c3-6
lexia3-citroen-c3-7
Lexia 3 is reading ECU: Delphi C6
lexia3-citroen-c3-8
Lexia 3 cable is gonna to read fault codes
lexia3-citroen-c3-9
Intermittent fault
Engine speed signal incorrect signal
lexia3-citroen-c3-10
lexia3-citroen-c3-11
lexia3-citroen-c3-12

lexia3-citroen-c3-13
The method used does not propose a solution
Permanent fault
Flowmeter signal short circuit to each open circuit
lexia3-citroen-c3-14

lexia3-citroen-c3-15

lexia3-citroen-c3-16

lexia3-citroen-c3-17

lexia3-citroen-c3-18
Check for the presence of the fault “turbocompressor”
lexia3-citroen-c3-19
Switch off ignition
D02802 Wait for 15 seconds before proceeding with the diagnosis
Switch on ignition
lexia3-citroen-c3-20
The fault “turbocompressor” is absent
Carry out the other checks on the diagnostic tree
lexia3-citroen-c3-21
Done!

Share This Post

Post Comment

site by bcz