Lonsdor K518 Program Key onb SsangYong Kyron 2014

How to program remote key on a SsangYong Kyron 2014 using Lonsdor K518ISE key programmer.

Step 1: Program key
Connect K518 host with vehicle via OBD
Select Immobilizer->SsangYong->Select from Type->Immobilizer->Type 2->Program key
lonsdor-k518-SsangYong-Kyron-1
lonsdor-k518-SsangYong-Kyron-2
lonsdor-k518-SsangYong-Kyron-3
lonsdor-k518-SsangYong-Kyron-4
lonsdor-k518-SsangYong-Kyron-5
lonsdor-k518-SsangYong-Kyron-6
     
(If don’t know which type to choose, try one by one. When select Type 1, it gave communication failed error. Type2 works)
Turn ignition switch to ON position with original key
lonsdor-k518-SsangYong-Kyron-7
Program complete. Program next key
lonsdor-k518-SsangYong-Kyron-8
Replace new key and turn on ignition
Program 2nd key success
Both keys can start car
lonsdor-k518-SsangYong-Kyron-9
Step 2: Program remote with Lonsdor k518
Select SsangYong->Select from Type->Remote->Type 1->Program remote
lonsdor-k518-SsangYong-Kyron-10
lonsdor-k518-SsangYong-Kyron-11
Turn ignition off and remove key
lonsdor-k518-SsangYong-Kyron-12
Press and hold unlock/panic button of the remote for 2 secs, then release it
lonsdor-k518-SsangYong-Kyron-13
Program remote success
lonsdor-k518-SsangYong-Kyron-14
Remote control works!
lonsdor-k518-SsangYong-Kyron-15

Share This Post

Post Comment

site by bcz