Program Mitsubishi Grandis 2010 24C02 Key with Tango

How to: program PCF7936 transponder key to a Mitsubishi Grandis  year 2010 using Xhorse VVDI Progand Tango key programmer.

tango-Mitsubishi-Grandis-1
Original transonder: PCF7936
Data location 24C02
Immo location: behind the decroative penal
Take off the decorative panel, the immo is in depth at the right upper corner
tango-Mitsubishi-Grandis-2
Step 1: Read IMMO Dump 
Read immo dump with vvdi prog or Orange 5
If you cannot find the wiring connection in vvdi-prog
use the wiring diagram in Orange 5
tango-Mitsubishi-Grandis-3
Open vvdi prog software
Select EEPROM/Flash->ATMEL->AT24C02
tango-Mitsubishi-Grandis-4
Save eeprom data
tango-Mitsubishi-Grandis-5
Step 2: Program transponder
Select Car Model->Mitsubishi->Grandis
tango-Mitsubishi-Grandis-6
Upload dump file read by vvdiprog
tango-Mitsubishi-Grandis-7
Select an unused key position
Insert new PCF7936 transponder into tango key programmer
Write key.
tango-Mitsubishi-Grandis-8
Until write key success.
Try to start car with new key.
http://www.key-programmer.org/2018/07/07/program-mitsubishi-grandis-2010-pcf7936-key-with-tango/

Share This Post

Post Comment

site by bcz