Auro IM600 Read Audi 2010 MED 17.4 ECU CS and PIN

New test report from Spanish technician: Reading of CS, MAC code and pin of ECU Audi 2010 MED17. 5 with Auro Otosys im600 tablet diagnostic and programming tool via direct method.
auro-im600-audi-med17-1
Remove ECU from vehicle
Connect IM600 and OtoFlash J2534 reprogramming adapter
Select IMMO->Audi->Engine->MED17->Read IMMO data using direct method
auro-im600-audi-med17-2
auro-im600-audi-med17-3
auro-im600-audi-med17-4
auro-im600-audi-med17-5
auro-im600-audi-med17-6
Jumper wire operation needs to be performed on the ECU
Press View Wiring Diagram to check pinouts and make wiring connection
auro-im600-audi-med17-7
auro-im600-audi-med17-8
auro-im600-audi-med17-9
Reading IMMO data in progress
The Auro IM600 OtoFlash adapter’s power and connection indicators keeps on and the communication indicator flashes (green color)
auro-im600-audi-med17-10
auro-im600-audi-med17-11
Wait until data reading is complete and start to calculate immo data
OtoSys IM600 read Audi PIN, CS code, MAC, IMMO Code, ECU software/hardware number etc information successfully
auro-im600-audi-med17-12
Save data.
Done.

Share This Post

Post Comment

site by bcz