How to Modify Carprog clone and A1 adapter

Carprog programmer clone can be connected to Volvo dashboard (here S60) with an A1 adapter. And obviously you must repair A1 and/or main unit if you don’t have a genuine or HQ clone kit.
Volvo S60 dashboard test:
carprog-volvo-s60-dash-1
carprog-volvo-s60-dash-2
carprog-volvo-s60-dash-3
carprog-volvo-s60-dash-4
carprog-volvo-s60-dash-5
carprog-volvo-s60-dash-6
carprog-volvo-s60-dash-7
carprog-volvo-s60-dash-8
carprog-volvo-s60-dash-9
carprog-volvo-s60-dash-10
carprog-volvo-s60-dash-11
carprog-volvo-s60-dash-12
carprog-volvo-s60-dash-13
carprog-volvo-s60-dash-14
Carprog clone on Volvo S60: works good!
A1 adapter fix:
Check A1. You may need to improve the work can.
rework-carprog-a1-cable
In detail…
If you think it not easy for you, spend $10 around to have a working one. $ buys relief.
Carprog PCB rework:
First and most important of all is to change 74HC125D to 74HCT125M on your carparog, i have good clone (good pcb) but still did not read some I2C,95 ,MCU. I bought 74HCT125M at farnell change all 4 of them and it is ok now. reading without problems.
rework-carprog-1
rework-carprog-2
If it’s difficult for you or you fail to rework, perhaps you could buy a HQ Carprog programmer at the best price (Forget the cheapest!!! you will get what you pay for, especially for China clones)
HQ-carprog-clone-1
HQ-carprog-clone-2
http://blog.obdii365.com/2018/03/15/carprog-clone-and-volvo-s60-dashboard/

Share This Post

Post Comment

site by bcz