SKP1000 Read Cruze 2015 Pin Code and Program Key

Guide to read Chevrolet Cruze 2015 pin code and program key with SKP1000 car key programmer by OBD.
Key information:
Original key: 3-button folding key
Frequency: 315MHz
Chip type: ID46 chip
Device to program: SKP 1000 tablet auto key programmer

Procedure:

Step 1: Read Pin Code
Connect SKP1000 host with vehicle via OBD socket
skp1000-cruze-2015-1
Select Immobilizer function and then GM brand
Select Chevrolet->Read Pin Code -> System 1
skp1000-cruze-2015-2
skp1000-cruze-2015-3
skp1000-cruze-2015-4
Read 4-digit Pin code success
skp1000-cruze-2015-5
Step 2: Program Key
In Chevrolet menu, select Cruze->Program Key
skp1000-cruze-2015-6
Turn ignition switch to ON position
Press YES to continue
skp1000-cruze-2015-7
SKP1000 key programmer require to enter 4-digit security pin code just read
skp1000-cruze-2015-8
Configuring system, please wait for about 10 minutes
Turn ignition OFF
Remove key
skp1000-cruze-2015-9
Close the door on the driver side
Close all electronic equipments
skp1000-cruze-2015-10
Turn ignition ON
Press YES to go on
skp1000-cruze-2015-11
SKP-1000 asks whether to program next key?
Press YES to continue
skp1000-cruze-2015-12
Turn ignition OFF
Remove key
skp1000-cruze-2015-13
Insert a new key
Turn ignition ON
Press YES
skp1000-cruze-2015-14
Follow steps above to program next key
Turn ignition OFF
Remove key
skp1000-cruze-2015-15
Program next key? Press NO
Configuring system for 45 seconds
Current Key: 2
skp1000-cruze-2015-16
SKP1000 program Cruze 2015 folding key success.
skp1000-cruze-2015-17

Share This Post

Post Comment