This blog will show you how to program new fob ( Frequency Operating Button ) for Toyota Rav4 2016 with cheap MINI VCI Cable and Techstream V10.30.029.
TIS Techstream Ver 10.30.029
Work with: MINI VCI J2534 diagnostic cable
Vehicle model and year: Toyota Rav4 2016
First connect MINI VCI 16pin connector to car obd port and the other side connect to USB port of computer
Then Switch ignition on
Run Techstream V10.30.029 and click “Connect to vehicle”
Toyota Techstream software will read out vehicle information, you should choose “w/ Smart Key” and “RADAR CRUISE” like the picture shows, then click next
Choose “Smart Key” option in System Selection Menu
Then select “Utility”
Select “Smart Code Registration”
Then press “Next” after all check boxed are checked
Press “Pre-Start CHK” button to review registration process, then press “Start” button to begin the process.
Note: you should carry out process below as soon as possible
Touch Engine Start Button with a registered key, then move the registered key out of the vehicle
Touch Engine Start Button with a new key
Done! The key code registration is complete
Finally, test your new key and enjoy!
Note: you don’t need to pay Extra cost for V10.30.029 techstream, it will come with MINI VCI diagnostic cable. Or you can free download this software from obdii365.com official blog! Thanks.