The new MPPS V18 clone supports K-line, CAN-L, CAN-H, MAIN + TRICORE + MULTIBOOT to program a wide range of ECUs like M3.8, M5.9, ME7xx, MED9, MED17, EDC15/16/17, Delphi, Siemens, Marelli, Delco, Sagem, Trionic and many others…including the Marelli ECU.
Pin out of mpps universal cable darek
Read ———— + 12v
Grey ———— boot pin
Green ———- K line
Blue ———— CAN-H
Orange ——– CAN-L
Black ———– Ground
The new ECUs have been tested using MPPS v18 ECU flasher cable for the tricore/boot wires:
Read / Write of Micro, Flash and EEprom without using a BDM programmer (fgtech, ktag)!
Fiat 6F3 – Full Read / Write Micro, Flash and EEprom over K-line and CAN.
Fiat 6JF – Full Read / Write Micro and EEprom over K-line.
Fiat 8DF – Full Read / Write Micro and EEprom over K-line.
Fiat 8F2 – Full Read / Write Micro and EEprom over K-line and CAN.
Fiat 8F3 – Full Read / Write Micro and EEprom over K-line and CAN.
Fiat 8GM – Full Read / Write Micro and EEprom over CAN.
Fiat 8GS – Full Read / Write Micro and EEprom over CAN.
Fiat 5SF3 – Full Read / Write Flash and EEprom over CAN.
Fiat 5SF3 – Full Read / Write EEprom over K-Line.
Fiat 5SF8 – Full Read / Write Flash and EEprom over K-line and CAN.
Fiat 5SF9 – Full Read / Write Flash and EEprom over CAN.
Fiat ME7.9.10 – Full Read / Write Micro over CAN.
Fiat ME7.6.3 – Full Read / Write Micro over CAN.
Opel 6O2 – Full Read / Write Micro, Flash and EEprom over K-line and CAN.
Opel 6O3 – Full Read / Write Micro, Flash and EEprom over K-line and CAN.
Opel 6JO – Full Read / Write Micro and EEprom over K-line.
….
More ECUs type will be tested…
Note: boot mode needs disassemble the ECU (available in mpps v18.12.3.8 only)
http://blog.obdii365.com/2016/12/02/tricore-multiboot-can-pinout-to-mpps-v18/