How to program Citroen Berlingo key with Autel DS708

1. Insert key into keyhole, turn IGN on but not to crank the engine.
2. Make connection between Autel MaxiDAS DS708 and the vehicle, and then boot up DS708 Main unit;
3. Select area and car model: European >> CITROEN >> BERLINGO >> BERLINGO 2;
4. Next automatically reading the vehicle’s VIN;
Program key for Citroen Berlingo with Autel DS708
5. You need to enter the vehicle information;
Program key for Citroen Berlingo with Autel DS708
6. Click “Control Unit” >> BSI >> Learning >> Key programming and click “start” on Unlock ECU interface.
Program key for Citroen Berlingo with Autel DS708
7. You will be asked for confidential code and click OK to continue.
Program key for Citroen Berlingo with Autel DS708
8. Enter the number of keys you want to be programmed.
9. Turn IGN off and then on within 15 seconds.
10. If success, it will pop out message to ask you to insert the next key in the ignition switch;
Note: It is ok if you only program one key; while you program more than one key, you just need to put another key in the ignition switch.

http://www.obdii365.com/wholesale/autel-maxidas-ds708-1213.html

Share This Post

Post Comment

site by bcz